中文english

EVA film specially used for Jewelry counter laminated glass

Release time:2015-07-16 15:17:00    reading:
Introduction

Features

FD-AT series is specially made for Jewelry counter and other special laminated glass .It has high temperature and adhesive ,the main features is no glue flow,high strength ,it can be processed both by glass autoclave and glass laminating furnace ,highly reduce the investment cost and production cost ,comparable with PVB film .

opaque color series

Low temperature segment Holding time High temperature segment Holding time
70℃ 30 minutes 140-150℃ 60 minutes

item thickness length specification
FD38AT 0.38 100 2000/2300
FD50AT 0.50 80 2000/2300
FD76AT 0.76 50 2000/2300

Application

\\\\

Advantages

Shandong Fangding not only produce the laminated glass machinery ,but also manufacture the inter-layer EVA film .with complete equipment and consumable materials we are the most professional solution expert of Laminated glass technology .

The most professional engineer, regularly visit, free guidance with maintenance tips .

All EVA film is produced by imported raw materials and auxiliaries,never use the recycled scrap ,ensure its high transparency ,high tensile strength ,anti-aging , yellowing resistance,and make sure longer use life to 10-15 years.

We are listed company and could guarantee the quality and after-sale service.

Import film production equipment, Germany intelligent thickness measurement system, high accuracy, and ensure uniformity of the film

The content of VA could up to 28-33%, to ensure adhesion of the film

Specializing in producing architectural

production process

This product uses the casting production process, is the EVA resin and melted adding additives mixing of raw materials, according to the requirements in turn added to the mixing machine mixing, so that the material sufficiently uniform drying up, mixed materials added after the screw extruder the machine's hopper, the heated extruder melt extrusion through a die gap outflow, to form a film-like product after rolling, then cooled and cut into user configuration desired width slitting products, delivered to the wound rolls, coiling, determine the product length by the note length counter. Finally, the inspection of the finished product, packaged and pack, after neatly stacked storage.

Flow chart of production process

EVA raw material + additives →mix→ extrusion → forming → embossing → cut → winding → package → storage

purchase process

proofing→ on trial → quantity → price → sign contract → pay → delivery

about delivery goods

Customers must check whether the external packing is intact or not ,whether polluted by rain or other pollution sources when you take delivery of the EVA films.If any bad phenomena occurs,you should make representations with the shipper and call our salesman in time .Otherwise it will be very difficult to claim against shipper for just compensation after you have received the products.

Please check the goods number marked on the external packing before you open it and use it after confirmed.Please take off the product labels and take care of it temporarily when you use the EVA film ,in order to provide us relative information to check it if there is any question in use of EVA film.

If the EVA film is slight moisture because of storage ,please do not blind production .You should make a sample and test its adhesive strength ,then put it into production after made sure it can be used.

Any EVA film our company agreed to return should be packed tightly before delivery to avoid pollution caused by damage in transit .Return loss due to poor packing of users ,the user need to bear the relative economic loss.

\\\\